lede/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "qcom-ipq8065-rt4230w.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "Askey RT4230W REV6";
	compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
};

&ubi {
	reg = <0x2400000 0x1a000000>;
};
add kernel 5.10 support and sync with upstream 2021-06-14 18:30:08 +08:00			`// SPDX-License-Identifier: GPL-2.0-or-later`

ipq806x: add support for askey rt4230w 256m nand version (#7595) The difference between flashing: Interrupt U-Boot and run these commands: setenv bootcmd "setenv mtdids nand0=nand0 && set mtdparts mtdparts=nand0:0xDC00000@0x2400000(firmware) && ubi part firmware && ubi read 0x44000000 kernel 0x6e0000 && bootm" saveenv 2021-08-06 18:07:10 +08:00			`#include "qcom-ipq8065-rt4230w.dtsi"`
add kernel 5.10 support and sync with upstream 2021-06-14 18:30:08 +08:00			`#include <dt-bindings/input/input.h>`

			`/ {`
			`model = "Askey RT4230W REV6";`
			`compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";`
			`};`

ipq806x: add support for askey rt4230w 256m nand version (#7595) The difference between flashing: Interrupt U-Boot and run these commands: setenv bootcmd "setenv mtdids nand0=nand0 && set mtdparts mtdparts=nand0:0xDC00000@0x2400000(firmware) && ubi part firmware && ubi read 0x44000000 kernel 0x6e0000 && bootm" saveenv 2021-08-06 18:07:10 +08:00			`&ubi {`
			`reg = <0x2400000 0x1a000000>;`
add kernel 5.10 support and sync with upstream 2021-06-14 18:30:08 +08:00			`};`