lede/target/linux/bcm27xx/patches-5.4/950-0875-dtoverlay-Add-overlay-for-Omnivision-OV9281-image-se.patch

From 489b7fc3df2013766f3c4d5f682dcc7992950293 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 6 Jul 2020 17:32:21 +0100
Subject: [PATCH] dtoverlay: Add overlay for Omnivision OV9281 image
 sensor

Adds an overlay for the OV9281 mono imaging sensor using 2 CSI-2
data lanes.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |   1 +
 arch/arm/boot/dts/overlays/README             |   8 ++
 arch/arm/boot/dts/overlays/ov9281-overlay.dts | 110 ++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/ov9281-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -115,6 +115,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	mpu6050.dtbo \
 	mz61581.dtbo \
 	ov5647.dtbo \
+	ov9281.dtbo \
 	papirus.dtbo \
 	pibell.dtbo \
 	piglow.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1813,6 +1813,14 @@ Load:   dtoverlay=ov5647
 Params: <None>
 
 
+Name:   ov9281
+Info:   Omnivision OV9281 camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=ov9281
+Params: <None>
+
+
 Name:   papirus
 Info:   PaPiRus ePaper Screen by Pi Supply (both HAT and pHAT)
 Load:   dtoverlay=papirus,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/ov9281-overlay.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for OV9281 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			ov9281: ov9281@60 {
+				compatible = "ovti,ov9281";
+				reg = <0x60>;
+				status = "okay";
+
+				clocks = <&ov9281_clk>;
+				clock-names = "xvclk";
+
+				avdd-supply = <&ov9281_avdd>;
+				dovdd-supply = <&ov9281_dovdd>;
+				dvdd-supply = <&ov9281_dvdd>;
+
+				port {
+					ov9281_0: endpoint {
+						remote-endpoint = <&csi1_ep>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+						clock-noncontinuous;
+						link-frequencies =
+							/bits/ 64 <456000000>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&csi1>;
+		__overlay__ {
+			status = "okay";
+
+			port {
+				csi1_ep: endpoint {
+					remote-endpoint = <&ov9281_0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0if>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@3 {
+		target-path="/";
+		__overlay__ {
+			ov9281_avdd: fixedregulator@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov9281_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+			};
+			ov9281_dovdd: fixedregulator@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov9281_dovdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+			ov9281_dvdd: fixedregulator@2 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov9281_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			ov9281_clk: ov9281-clk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c0mux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@5 {
+		target-path="/__overrides__";
+		__overlay__ {
+			cam0-pwdn-ctrl = <&ov9281_avdd>,"gpio:0";
+			cam0-pwdn      = <&ov9281_avdd>,"gpio:4";
+		};
+	};
+};