lede/README.md

138 lines
5.5 KiB
Markdown
Raw Normal View History

欢迎来到Lean的Openwrt源码仓库
=
Welcome to Lean's git source of OpenWrt and packages
=
中文:如何编译自己需要的 OpenWrt 固件
-
注意:
-
1. **不**要用 **root** 用户 git 和编译!!!
2. 国内用户编译前最好准备好梯子
3. 默认登陆IP 192.168.1.1, 密码 password
2021-01-24 20:03:22 +08:00
2021-01-24 20:02:01 +08:00
4.免责声明:本人不欢迎例如 nobk 这种傻逼使用或者访问本源代码哪怕一个字节,否则一旦他家里因此而发生各种全家富贵的情况,与本人一律无关
2021-01-24 20:03:22 +08:00
编译命令如下:
-
1. 首先装好 Ubuntu 64bit推荐 Ubuntu 18 LTS x64
2. 命令行输入 `sudo apt-get update` ,然后输入
`
2020-09-13 09:08:03 +08:00
sudo apt-get -y install build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch python3 python2.7 unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib p7zip p7zip-full msmtp libssl-dev texinfo libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint device-tree-compiler g++-multilib antlr3 gperf wget curl swig rsync
`
3. 使用 `git clone https://github.com/coolsnowwolf/lede` 命令下载好源代码,然后 `cd lede` 进入目录
4. ```bash
./scripts/feeds update -a
./scripts/feeds install -a
make menuconfig
```
5. `make -j8 download V=s` 下载dl库国内请尽量全局科学上网
2020-03-25 11:06:38 +08:00
6. 输入 `make -j1 V=s` -j1 后面是线程数。第一次编译推荐用单线程)即可开始编译你要的固件了。
本套代码保证肯定可以编译成功。里面包括了 R20 所有源代码,包括 IPK 的。
你可以自由使用,但源码编译二次发布请注明我的 GitHub 仓库链接。谢谢合作!
=
2020-03-25 11:06:38 +08:00
二次编译:
```bash
cd lede
git pull
./scripts/feeds update -a && ./scripts/feeds install -a
make defconfig
make -j8 download
make -j$(($(nproc) + 1)) V=s
```
如果需要重新配置:
```bash
rm -rf ./tmp && rm -rf .config
make menuconfig
make -j$(($(nproc) + 1)) V=s
```
2020-03-25 11:06:38 +08:00
编译完成后输出路径:/lede/bin/targets
特别提示:
------
1.源代码中绝不含任何后门和可以监控或者劫持你的 HTTPS 的闭源软件SSL 安全是互联网最后的壁垒。安全干净才是固件应该做到的;
2.如有技术问题需要讨论,欢迎加入 QQ 讨论群OP共享技术交流群 ,号码 297253733 ,加群链接: 点击链接加入群聊【OP共享技术交流群】[点击加入](https://jq.qq.com/?_wv=1027&k=5yCRuXL "OP共享技术交流群")
2020-03-23 14:37:37 +08:00
3.想学习OpenWrt开发但是摸不着门道自学没毅力基础太差怕太难学不会跟着佐大学OpenWrt开发入门培训班助你能学有所成
报名地址:[点击报名](http://forgotfun.org/2018/04/openwrt-training-2018.html "报名")
2020-05-14 15:28:39 +08:00
## 软路由介绍
友情推荐不恰饭:如果你在寻找一个低功耗小体积性能不错的 x86/x64 路由器,我个人建议可以考虑
小马v1 的铝合金版本 (N3710 4千兆)[页面介绍](https://item.taobao.com/item.htm?spm=a230r.1.14.20.144c763fRkK0VZ&id=561126544764 " 小马v1 的铝合金版本")
2020-05-14 15:22:39 +08:00
2020-05-14 15:30:44 +08:00
![xm1](doc/xm5.jpg)
![xm2](doc/xm6.jpg)
2020-05-14 15:20:50 +08:00
2020-03-23 14:37:37 +08:00
## Donate
如果你觉得此项目对你有帮助,可以捐助我们,以鼓励项目能持续发展,更加完善
### Alipay 支付宝
![alipay](doc/alipay_donate.jpg)
### Wechat 微信
2020-03-23 14:37:37 +08:00
![wechat](doc/wechat_donate.jpg)
------
English Version: How to make your Openwrt firmware.
-
Note:
--
1. DO **NOT** USE **ROOT** USER TO CONFIGURE!!!
2. Login IP is 192.168.1.1 and login password is "password".
Let's start!
---
First, you need a computer with a linux system. It's better to use Ubuntu 18 LTS 64-bit.
Next you need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
To install these program, please login root users and type
`
2020-07-27 19:05:41 +08:00
sudo apt-get -y install build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch python3.5 python2.7 unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib p7zip p7zip-full msmtp libssl-dev texinfo libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint device-tree-compiler g++-multilib antlr3 gperf wget swig rsync
`
in terminal
Third, logout of root users. And type this `git clone https://github.com/coolsnowwolf/lede` in terminal to clone this source.
After these please type `cd lede` to cd into the source.
Please Run `./scripts/feeds update -a` to get all the latest package definitions
defined in `feeds.conf` / `feeds.conf.default` respectively
and `./scripts/feeds install -a` to install symlinks of all of them into
`package/feeds/` .
Please use `make menuconfig` to choose your preferred
configuration for the toolchain and firmware.
Use `make menuconfig` to configure your image.
Simply running `make` will build your firmware.
It will download all sources, build the cross-compile toolchain,
2020-09-15 07:05:55 +05:30
the kernel and all chosen applications.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
## Note: Addition Lean's private package source code in `./package/lean` directory. Use it under GPL v3.
## GPLv3 is compatible with more licenses than GPLv2: it allows you to make combinations with code that has specific kinds of additional requirements that are not in GPLv3 itself. Section 7 has more information about this, including the list of additional requirements that are permitted.