mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-06-20 08:05:29 +08:00
86bc29e4a8
[mac80211] ca5ee6e mac80211: Fix potential endless loop 2c14710 mac80211: add more AQL fixes/improvements 91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful acf1733 mac80211: add preliminary support for enabling 802.11ax in config d717343 mac80211: update encap offload patches to the latest version 673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports cd36c0d mac80211: select the first available channel for 5GHz interfaces 1c6d456 mac80211: fix regression in station connection monitor optimization 4bd7689 mac80211: update sta connection monitor regression fix [target] Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
72 lines
1.3 KiB
Diff
72 lines
1.3 KiB
Diff
From: Landen Chao <landen.chao@mediatek.com>
|
|
Subject: [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to
|
|
bananapi-bpi-r64 board
|
|
Date: Tue, 10 Dec 2019 16:14:42 +0800
|
|
|
|
Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
|
|
|
|
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
|
|
---
|
|
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++
|
|
1 file changed, 50 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
@@ -150,6 +150,56 @@
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
+
|
|
+ switch@0 {
|
|
+ compatible = "mediatek,mt7531";
|
|
+ reg = <0>;
|
|
+ reset-gpios = <&pio 54 0>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "wan";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan0";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan1";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan2";
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "lan3";
|
|
+ };
|
|
+
|
|
+ port@6 {
|
|
+ reg = <6>;
|
|
+ label = "cpu";
|
|
+ ethernet = <&gmac0>;
|
|
+ phy-mode = "2500base-x";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <2500>;
|
|
+ full-duplex;
|
|
+ pause;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
};
|
|
};
|
|
|