mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-07-29 05:56:59 +08:00
b5fa901e0b
* rockchip: refresh NanoPi R2S patches Update the patches for the NanoPi R2S to the v3 sent (and accepted) upstream. Signed-off-by: David Bauer <mail@david-bauer.net> * rockchip: rk3328: add compatible to NanoPi R2S ethernet PHY This adds the compatible property to the NanoPi R2S ethernet PHY node. Otherwise, the PHY might not be probed, as the PHY ID reads all 0xff when it is still in reset. Signed-off-by: David Bauer <mail@david-bauer.net> * uboot-rockchip: update NanoPi R2S patches Update the patches required for the NanoPi R2S to match the DTS accepted for upstream Linux. The U-Boot patch meanwhile is still pending upstream. Signed-off-by: David Bauer <mail@david-bauer.net> * rockchip: refresh target patches Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org> Co-authored-by: CN_SZTL <cnsztl@project-openwrt.eu.org> Co-authored-by: wevsty <ty@wevs.org> * rockchip: fix NanoPi R2S PHY ID Fix the PHY ID for the NanoPi R2S PHY compatible to match the used PHY. The ID was wrong as I've accidentally picked the wrong upstream patch. Signed-off-by: David Bauer <mail@david-bauer.net> Co-authored-by: David Bauer <mail@david-bauer.net> Co-authored-by: wevsty <ty@wevs.org>
29 lines
881 B
Diff
29 lines
881 B
Diff
From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
|
|
From: David Bauer <mail@david-bauer.net>
|
|
Date: Sun, 26 Jul 2020 13:32:59 +0200
|
|
Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
|
|
|
|
This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
|
|
NanoPi R2S. Add the correct value for the RTL8153 LED configuration
|
|
register to match the blink behavior of the other port on the device.
|
|
|
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
|
|
1 file changed, 7 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
|
@@ -399,4 +399,11 @@
|
|
&usbdrd_dwc3 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
+
|
|
+ usb-eth@2 {
|
|
+ compatible = "realtek,rtl8153";
|
|
+ reg = <2>;
|
|
+
|
|
+ realtek,led-data = <0x87>;
|
|
+ };
|
|
};
|